Connect Your Bitaxe to ausolo.ckpool.org: Aussie Solo Mining
Point your Bitaxe at the Australian endpoint of solo ckpool: no account, no pool wallet, the block reward goes straight to your address if you find a block.
Solo mining is the most philosophically pure form of Bitcoin mining: you point your hardware at the network, you do the work, and if you find a valid block you collect the entire block reward, no pool splitting, no shared payouts, no PPLNS accounting.
ausolo.ckpool.org is the Australian endpoint of solo.ckpool.org, which the BitcoinTalk thread describes as operated and created by Con Kolivas, an Australian-born developer and the author of cgminer and ckpool. The pool describes itself as anonymous and not-for-profit, and says it has been mining solo blocks since 2014. The Australian endpoint resolves to an address that IP geolocation places in Brisbane, so it should be close to most Australian connections. The fee is 2%, paid on top of Bitcoin transaction fees, and only comes out of a block reward.
This guide walks you through pointing your Bitaxe at ausolo in under 15 minutes. You’ll end the session with your miner running, shares being accepted, and a realistic picture of what your odds actually look like.
What you’ll need
- A Bitaxe miner, any model works (Gamma 601/602, Ultra, Supra, Hex)
- The 5V DC power supply that came with it (5A or more, 5.5 x 2.1 mm barrel plug)
- A computer or phone on the same Wi-Fi network as the Bitaxe
- A Bitcoin address you control, this is where any block reward would be paid
Warning: Only use a Bitcoin address from a wallet you fully control (hardware wallet, Sparrow, etc.). Do not use an exchange deposit address, exchanges can change or recycle addresses, and a block reward sent to a defunct address is gone permanently.
Step 1, Understand what solo ckpool is
Solo ckpool is a pool in name only: the page says it is “NOT a pool despite its name”. It relays your work to the Bitcoin network so you can mine solo blocks without running your own node. There is no payment scheme, no shared reward, and no login system. The operator is Con Kolivas (ckolivas), the developer of cgminer and ckpool.
Key facts:
- Fee: 2%, on top of Bitcoin transaction fees. It comes out of a block reward, so if you never find a block you pay nothing.
- Payment: the block reward goes directly to the Bitcoin address you provide as your username (less the fee). There is no pool wallet.
- No account: Your Bitcoin address is your identity. The pool tracks your hashrate and shares by address.
- Payout threshold: none. The reward is in the block itself.
- Official site: solo.ckpool.org (ausolo is listed there as the Australia server)
- Minimum difficulty: 10,000, so a small miner can take a while to show in stats. The pool advises against mining below 100 GH/s; a Bitaxe is above that.
- High-diff ports: 4334 (V1) and 4336 (V2) are for mining rentals only. Do not use them on a Bitaxe.
- Stratum V2: the pool page lists a V2 endpoint at
stratum.ckpool.org:3336, not on theausolohost. This guide uses V1 on port 3333.
Step 2, Understand the honest maths
A Bitaxe Gamma 601 runs at roughly 1.2 TH/s. The Bitcoin network as of October 2026 sits around 1,000 EH/s (1,000,000,000 TH/s).
Your share of the network:
1,200 GH/s ÷ 1,000,000,000,000 GH/s ≈ 0.00000012%
Expected blocks per year at this hashrate: approximately 0.00006, or one block every ~16,000 years on average.
That said, probability is memoryless. Multiple Bitaxe units found solo blocks in 2024 and 2025. Some miners got lucky in their first week; others have been running for years with nothing. That’s what a lottery is.
Run it for the sats-per-day contribution to your self-custody stack, or run it for the dream. Just don’t run it instead of a salary.
Tip: If you want something other than plain solo, the Parasite Pool guide covers a beta pool that splits most of each block among its miners. Read that guide first.
Step 3, Get your Bitaxe’s IP address
Power on your Bitaxe and connect it to your 2.4 GHz Wi-Fi network if you haven’t already. If you need help with the initial setup, see the Bitaxe assembly and first boot guide.
Find the IP address one of these ways:
- Check your router’s DHCP client list, look for a device named
bitaxeor similar - Try
http://bitaxe.localin your browser (works on most home networks) - The Bitaxe screen (if fitted) displays the IP address after connecting
Then open a browser and navigate to:
http://<your-bitaxe-ip>
You should see the AxeOS web interface.
Step 4, Open the pool settings
In AxeOS, open the Pool page from the left-hand menu or navigate to:
http://<your-bitaxe-ip>/#/pool
Open the Pool page from the left-hand menu. You’ll see fields for:
- Stratum Host
- Stratum Port
- User
- Password
Step 5, Enter the ausolo stratum details
Fill in the fields exactly as follows:
Hostname (Stratum URL):
ausolo.ckpool.org
Port:
3333
Username, your Bitcoin address, with optional worker suffix:
1YourBitcoinAddressHere.bitaxe1
Replace 1YourBitcoinAddressHere with your actual Bitcoin address (starts with 1, 3, or bc1). The .bitaxe1 worker suffix after the dot is optional but useful if you’re running multiple units, it appears in your pool stats.
Full example with a real-format address and worker name:
bc1qxy2kgdygjrsqtzq2n0yrf2493p83kkfjhx0wlh.gamma01
Password:
x
The pool ignores this field entirely. Enter x, anything you like, or leave it blank.
Warning: Do not use a SegWit address from an exchange. Use your own wallet address. If you’re unsure, generate a fresh receive address in Sparrow Wallet or your hardware wallet.
Step 6, (Optional) Configure a fallback pool
AxeOS supports a fallback pool. If ausolo goes offline your Bitaxe will automatically fail over.
Fallback hostname:
stratum.ckpool.org
Fallback port:
3333
Fallback username: Same Bitcoin address and worker name as primary.
You can also add sgsolo.ckpool.org (Singapore) as a further fallback. The pool page lists Singapore as the other Asia-Pacific server.
Step 7, Save and restart
Click Save, then Restart in AxeOS. The Bitaxe will restart its stratum connection, this takes 5–15 seconds.
Watch the Dashboard page for:
- Connection status: Connected to
ausolo.ckpool.org - Shares accepted: a positive number climbing
- Hash rate: matching your model’s rated speed (allow 2–3 minutes to stabilise)
Step 8, Verify your miner on the pool stats page
Per-address statistics are served from the ckpool stats host, not from ausolo itself (ausolo.ckpool.org/users/<address> returns 404). Navigate to:
https://raw.stats.ckpool.org/users/<your-bitcoin-address>
Example:
https://raw.stats.ckpool.org/users/bc1qxy2kgdygjrsqtzq2n0yrf2493p83kkfjhx0wlh
Graphs are at stats.ckpool.org.
You should see:
- Your hashrate (GH/s), which may take a while to populate (minimum pool difficulty is 10,000)
- Share count
- Best difficulty share so far
If the page shows no data after 30 minutes, double-check the username field in AxeOS, a typo in the address is the most common cause of zero accepted shares.
Step 9, Check the Bitaxe screen and temperature
Let the Bitaxe run for 30 minutes and confirm:
- Temperature: BM1370/BM1368 chip should sit below 65°C. Above 70°C, check airflow.
- Frequency / voltage: AxeOS defaults are fine for beginners, don’t overclock for solo mining; reliability matters more than a few extra GH/s.
- Hashrate stability: Should be within ±5% of rated spec after warm-up.
Tip: Tassie hydro and rooftop solar are both popular choices for Aussie Bitaxe runners wanting to minimise electricity cost. At ~15W draw, a Bitaxe Gamma costs around $0.05–$0.08 AUD per day on a typical NSW tariff, well worth it for the dream.
Troubleshooting
Shares accepted but hashrate shows zero on the pool stats page Pool stats can lag. Wait and refresh. If still zero after 30 minutes, your address may have a typo, paste it into a Bitcoin address validator and compare.
AxeOS shows “Disconnected” or “Stratum error”
Check that your home network can reach external internet. Test by pinging ausolo.ckpool.org from your router. If it is down, try the fallback stratum.ckpool.org:3333.
Hashrate is 30–50% below rated spec Usually a thermal issue. Reseat the heatsink, check the thermal pad, and ensure airflow isn’t blocked. Undervolting slightly in AxeOS can also help stability.
“Invalid Bitcoin address” rejection
The pool validates BTC addresses and rejects workers with malformed ones. Check for extra spaces, missing characters, or accidentally pasting a Testnet address (starts with m or tb1). Only mainnet addresses are accepted.
Bitaxe keeps rebooting Power supply may be under-spec. Use a quality 5V 3A USB-C adapter, cheap phone chargers often can’t sustain the current under mining load.
What’s next
- Want something other than plain solo? Read the Connect Bitaxe to Parasite Pool guide.
- Just got your Bitaxe and haven’t set it up yet? Start with the Bitaxe Assembly and First Boot guide.
- Ready to add another unit? Browse the full Bitaxes collection, running two doubles your odds without any extra complexity.
- Official ckpool page and support: solo.ckpool.org, the BitcoinTalk support thread, and @ckpooldev on X.
Frequently Asked Questions
Will I actually find a block solo mining with one Bitaxe?
Statistically, it's a lottery ticket, not income. At about 1.2 TH/s against roughly 1,000 EH/s of global network hashrate, your expected time to find a solo block is around 16,000 years. Bitaxe units have found blocks globally in 2024–2025, so it does happen, but you should treat it as a fun long shot, not a retirement plan.
What's the difference between ausolo and solo.ckpool.org?
ausolo.ckpool.org is the Australian endpoint of solo.ckpool.org, so the fee and rules are the same. An endpoint nearer to you usually has a lower round-trip time, but routing varies by ISP, so test from your own connection.
Do I need to create an account or sign up anywhere?
No. Your Bitcoin address is your identity. Just put your address in the Username field in AxeOS and you're done. The pool has no wallet and holds no funds: a found block pays your address directly.
What password should I enter?
The pool ignores the password field. Enter 'x' or anything else; it makes no difference.
What happens if ausolo.ckpool.org goes down?
Your Bitaxe will stop submitting shares until it reconnects. Configure stratum.ckpool.org:3333 as a fallback pool in AxeOS. The pool page describes it as the auto-selected endpoint with failover.